SUSPENSION 13-17
Suspension Arms
Rear Side [A]:
Circlip [B] (front side)
Ball Joint Bearing [C]
Circlip [D] (rear side)
Special Tool - Inside Circlip Pliers: 57001-143
•
Apply grease:
Oil Seal Lips
•
Install:
Sleeve (front side)
Collars (rear side)
Stabilizer Removal
•
Remove:
Rear Wheels (see Wheel Removal in the Wheels/Tires
chapter)
Stabilizer Joint [A]
○
Hold the joint bolt with an Allen wrench [B], and remove
the nut [C].
•
Remove:
Stabilizer Holder Bolts [A]
Stabilizer Holders [B]
Dampers and Stabilizer [C]
Stabilizer Installation
•
Install:
Dampers [A] and Stabilizer [B]
Stabilizer Holders [C] and Bolts
•
Tighten:
Torque - Stabilizer Holder Bo lts [D]: 22 N·m (2.2 kgf·m, 16
ft·lb)
•
Install:
Stabilizer Joints [E]
○
Hold the joint bolt with an Allen wrench, and tighten the
nut.
Torque - Stabilizer Joint Nuts [F]: 46 N ·m (4.7 kgf·m , 34 ft·lb)
•
Install:
Rear Wheels (see Wheel Installation in the Wheels/Tires
chapter)
Comments to this Manuals