DR ALL-TERRAIN Service Manual Page 330

  • Download
  • Add to my manuals
  • Print
  • Page
    / 594
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 329
11-10 F INAL DRIVE
Specifications
Item Standard Service Limit
Output Bevel Gear Case
Output Bevel Gear Backlash 0.05 0.11 mm (0.0020 0.0043 in.) –––
(at output drive shaft spline)
Front Final Gear Case
Gear Case Oil (same engine oil):
Type API SF or SG –––
API SH, SJ or SL with JASO MA
–––
Viscosity SAE 10W-40 –––
Oil Level Filler opening bottom ––
Capacity 0.40 L (0.42 US qt) –––
Coupling Bushing Inside Diameter 13.000 13.018 mm (0.5118 0.5125 in.) 13.048 mm
(0.5137 in.)
LSD Clutch Torque:
(when variable differential control
lever is released.)
15 20 N·m (1.5 2.0 kgf·m, 11 14 ft·lb)
–––
(when variable differential control
lever is pulled in.)
157 N·m (16 kgf·m, 116 ft·lb) or more
–––
Bevel Gear Backlash 0.10 0.20 mm (0.004 0.008 in.) –––
(at pinion gear spline)
Rear Final Gear Case
Gear Case Oil:
Type
MOBIL Fluid 424 or CITGO TRANSGARD
TRACTOR HYDR
AULIC FLUID
–––
Oil Level Filler opening bottom ––
Capacity 0.72 L (0.76 US qt)
–––
Rear Final Bevel Gear Backlash 0.04 0.17 mm (0.002 0.007 in.) –––
(at pinion gear spline)
Page view 329
1 2 ... 325 326 327 328 329 330 331 332 333 334 335 ... 593 594

Comments to this Manuals

No comments