DR ALL-TERRAIN Service Manual Page 29

  • Download
  • Add to my manuals
  • Print
  • Page
    / 594
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 28
PERIODIC MAINTENANCE 2-7
Torque and Locking Agent
Torque
Fastener
N·m
kgf·m ft·lb
Remarks
Crankcase Bolts (M8) 75 mm (2.95 in.)
20 2.0 15
S
Crankcase Bolts (M8) 110 mm (4.33 in.) 20 2.0 15 S
Crankcase Bolt (M8) 110 mm (4.33 in.) 20 2.0 15 S, L
Crankcase Bolts (M6) 40 mm (1.57 in.) 9.8 1.0 87 in·lb
Crankcase Bolts (M6) 65 mm (2.56 in.) 9.8 1.0 87 in·lb
Bearing Position Plate Screws
4.9 0.50 43 in·lb L
Rear Cylinder Camshaft Chain Guide Bolt
20 2.0 15
Grip Holder Nut 9.8 1.0 87 in·lb
Shift Lever Assembly Bracket Bolts 19.6 2.0 14
Tie-rod End Front Locknut 9.8 1.0 87 in·lb Lh
Tie-Rod End Rear Locknut 9.8 1.0 87 in·lb
Tie-rod End Nut 19.6 2.0 14
Shift Lever Assembly Nut 19.6 2.0 14
Shift Lever Clamp Bolt 13.5 1.4 119 in·lb
Tie-rod End Bolt 9.8 1.0 87 in·lb
Shift Shaft Positioning Bolt 25 2.5 18
Shift Shaft Spring Bolt 25 2.5 18 L
Shift Shaft Cover Bolts
8.8 0.90 78 in·lb
Tie-rod End Locknut 19.6 2.0 14
Neutral Position Switch 15 1.5 11
ReversePositionSwitch
15 1.5 11
Shift Lever Guide Mounting Nut
19.6 2.0 14
Wheel/Tires
Tie-rod Locknuts 37 3.8 27
Wheel Nuts (First Torque)
15 1.5 11
S
Wheel Nuts (Final Torque) 76 7.7 56 S
Front Axle Nuts 197 20 145
Rear Axle Nuts 265 27 195
Final Drive
(Output Bevel Gears)
Output Driven Bevel Gear Housing Bolts 26 2.7 20
Output Drive Bevel Gear Housing Bolts 26 2.7 20
Bearing Holder 137 14 101 L
Bevel Gear Holder Nut 157 16 116 L
Bearing Holder 120 12 88 L
Output Shaft Holder Nut 157 16 116 L
Rotor Mounting Bolts 12 1.2 106 in·lb
Output Drive Bevel Gear Cover Bolts 8.8 0.90 78 in·lb
Forward/Reverse Detecting Sensor Mounting Bolt 15 1.5 11
(Front Final Gear Case)
Variable Differential Control Shift Shaft Lever Bolt 8.8 0.90 78 in·lb
Front Final Gear Case Left Cover Bolts (M6)
9.8 1.0 87 in·lb
L(4),S
Ring Gear Bolts
57 5.8 42 LB
Page view 28
1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 593 594

Comments to this Manuals

No comments