DR ALL-TERRAIN Service Manual Page 364

  • Download
  • Add to my manuals
  • Print
  • Page
    / 594
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 363
11-44 F INAL DRIVE
Front Final Gear Case
Ring Gear Disassembly
Remove:
Ring Gear Assembly (see Front Final Gear Case Disas-
sembly)
Ring Gear Bolts [A]
Ring Gear [B]
Remove:
Differential Gear Case Cover [A]
Right Side Gear (16T) [B]
Pins [C]
Spider Gear Shaft [D]
Spider Gears (10T) [E]
Left Side Gear (16T) [F]
Left Differential Gear Case [G]
Ring Gear Assembly
Press the bearing [A] on the left differential gear case [B]
until it is bottomed.
Apply engine oil [C] to the spider gears and the spider
gear shaft.
Apply molybdenum disulfide grease [D] to the left side
gear (16T) [E].
Install:
Left Side Gear (16T)
Spider Gears (10T) [F]
Spider Gear Shaft [G] and Pins [H]
Apply engine oil [A] to the spider gears.
Apply molybdenum disulfide grease [B] to the right side
gear (16T) [C].
Install:
Right Side Gear (16T)
Differential Gear Case Cover [D]
Ring Gear [E]
Apply a non-permanent locking agent (Three Bond:
TB2471 Blue) to the ring gear bolts [F], and tighten them.
Torque - Ring Gear Bolts: 57 N·m (5.8 kgf·m, 42 ft·lb)
NOTE
Keep the ring gear assembly at more than 20°C (68°F)
for six hours after tightening the bolts.
Page view 363
1 2 ... 359 360 361 362 363 364 365 366 367 368 369 ... 593 594

Comments to this Manuals

No comments