DR Commercial Operations Instructions download pdf (Page 64)

60 30.00 COMMERCIAL DR

RAPID-FEED™ CHIPPER

Verify that th

its detent.

2. Pull on the b

ball from the

1/16" in the

adjustment. Follow the proper adjustment

procedure in the following steps.

Hitch Coupler Adjustment

1. With the proper size ball in the socket of the hitch

coupler, close the latch of the coupler completely

(Figure 71). Verify that the locking trigger is properly

engaged in its detent.

2. Tighten the lock nut on the underside of the coupler

until the spring between the nut and the clamp is fully

compressed. Then back off the lock nut 1/2 turn or

just enough that the latch is able to clamp and

unclamp from the ball.

tch Coupler Adjustment Check

Place the proper size ball in the socket of the

coupler and close the latch assembly (Figure 70).

e locking trigger is properly engaged in

all and/or coupler, trying to remove the

socket. If the ball moves more than

coupler’s socket, the clamp requires

Figure 71

Lock Nut

Ball Clamp

Spring

Figure 70

Pull

1/16"

Movement

Ball

Locking

Trigger

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 79 80

No comments

DR Commercial Operations Instructions Page 64