DR Commercial Operations Instructions download pdf (Page 21)

Connecting the Battery Cable

We ship the 30.00 COMMERCIAL DR RAPID-FEED

CHIPPER with the negative terminal battery cable

disconnected. This prevents the battery from discharging

during shipment. Before using your 30.00 COMMERCIAL

DR RAPID-FEED CHIPPER, you must connect the battery

cable.

Battery

Terminal

Hardware

Battery

Positive

Battery

Cable

Negative

Battery

Cable

Tools and Supplies Needed:

• Two 5/16" Wrenches

1. Remove the hardware from the negative terminal of

the Battery with two 5/16" wrenches (Figure 10).

Figure 10

2. Position the negative Battery Cable and secure with

the negative terminal hardware using two 5/16"

wrenches.

Adding Engine Oil and Gasoline

• YOU MUST ADD OIL BEFORE STARTING THE ENGINE. THIS MACHINE IS SHIPPED WITHOUT

OIL. TRACES OF OIL MAY BE IN THE RESERVOIR FROM FACTORY TESTING, BUT

YOU MUST ADD

OIL BEFORE STARTING THE ENGINE. FILL THE RESERVOIR SLOWLY CHECKING THE DIPSTICK

FREQUENTLY TO AVOID OVERFILLING.

• TO GET AN ACCURATE READING WHEN CHECKING THE OIL LEVEL:

- THE MACHINE SHOULD BE ON A LEVEL SURFACE.

- THE DIPSTICK

SHOULD BE PUSHED ALL THE WAY IN TO ENSURE AN ACCURATE OIL LEVEL

READING.

Capacities

Engine SAE 30 Oil - 56 oz. (1.66 L)

Fuel Tank Unleaded gasoline, 9 US quarts (8.5 L)

Tip: To avoid confusion, we recommend leaving the caps on the gas and oil fills until you are ready to

pour either gasoline or oil into the correct fill.

NOTE: Use SAE 30 high detergent oil classified “For Service SF, SG, SH, SJ” or higher. Do not use special

additives. Other types of oil could cause problems operating your machine. Please refer to your

Engine Owner’s Manual for detailed oil information.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 79 80

Comments to this Manuals

No comments

DR Commercial Operations Instructions Page 21

Comments to this Manuals

Related products and manuals for Lawnmowers DR Commercial