DR Commercial Operations Instructions download pdf (Page 11)

Safety for Children and Pets

TRAGIC ACCIDENTS CAN OCCUR IF THE OPERATOR IS NOT ALERT TO THE PRESENCE OF CHILDREN

AND PETS. CHILDREN ARE OFTEN ATTRACTED TO THE MACHINE AND THE CHIPPING ACTIVITY.

NEVER

ASSUME THAT CHILDREN WILL REMAIN WHERE YOU LAST SAW THEM. ALWAYS FOLLOW

THESE PRECAUTIONS:

• KEEP CHILDREN AND PETS AT LEAST 100 FEET FROM THE WORKING AREA AND UNDER THE

WATCHFUL CARE OF A RESPONSIBLE ADULT.

• BE ALERT AND TURN THE MACHINE OFF IF CHILDREN OR PETS ENTER THE WORK AREA.

• NEVER ALLOW CHILDREN TO OPERATE THE 30.00 COMMERCIAL DR RAPID-FEED CHIPPER.

• NEVER TRY TO PICK UP, MOVE, OR TRANSPORT THE MACHINE WHILE THE ENGINE IS R

OR THE FLYWHEEL IS TURNING.

• THE MUFFLER AND ENGINE BECOME VERY HOT AND CAN CAUSE A SEVERE BURN; DO NOT

TOUCH.

• CLEAR THE AREA OF OBJECTS SUCH AS WIRE AND ROPE, ETC. INSERTING THESE OBJECTS INTO

THE CHIPPER HOPPER COULD DAMAGE THE FLYWHEEL AND/OR CAUSE INJURY.

• NEVER, UNDER ANY CONDITIONS, REMOVE, BEND, CUT, FIT, WELD, OR OTHERWISE ALTER

STANDARD PARTS ON THE 30.00 COMMERCIAL DR RAPID-FEED CHIPPER. THIS INCLUDES ALL

SHIELDS AND GUARDS. MODIFICATIONS TO YOUR MACHINE COULD CAUSE PERSONAL

URIES AND PROPERTY DAMAGE AND WILL VOID YOUR WARRANTY.

UNNING

Safety with Gasoline - Powered Machines

GASOLINE IS A HIGHLY FLAMMABLE LIQUID. GASOLINE ALSO GIVES OFF FLAMMABLE VAPOR THAT

CAN BE EASILY IGNITED AND CAUSE A FIRE OR EXPLOSION. NEVER OVERLOOK THE HAZARDS OF

GASOLINE. ALWAYS FOLLOW THESE PRECAUTIONS:

• NEVER RUN THE ENGINE IN AN ENCLOSED AREA OR WITHOUT PROPER VENTILATION AS THE

EXHAUST FROM THE ENGINE CONTAINS CARBON MONOXIDE, WHICH IS AN ODORLESS,

TASTELESS, AND DEADLY POISONOUS GAS.

• STORE ALL FUEL AND OIL IN CONTAINERS SPECIFICALLY DESIGNED AND APPROVED FOR THIS

PURPOSE AND KEEP AWAY FROM HEAT AND OPEN FLAME, AND OUT OF THE REACH OF

CHILDREN.

• REPLACE RUBBER FUEL LINES AND GROMMETS WHEN WORN OR DAMAGED AND AFTER 5 YEARS

OF USE.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 79 80

No comments

DR Commercial Operations Instructions Page 11