DR WIDE-CUT LAWN MOWER Operations Instructions Page 27

  • Download
  • Add to my manuals
  • Print
  • Page
    / 64
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 26
CONTACT US AT www.DRPower.com or CALL TOLL FREE 1-800-DR-OWNER 23
Obstacle Tips
Dealing with obstacles in the terrain is easy with your new DR WIDE-CUT LAWN MOWER. The following
section explains how to approach most common obstacles.
THE MOWER ENGINE'S POWER CAN EASILY THROW STONES, STICKS, AND OTHER DEBRIS AT GREAT
VELOCITY, WHICH COULD CAUSE PERSONAL INJURY OR PROPERTY DAMAGE. DO NOT RUN THE
MACHINE OVER GRAVEL DRIVEWAYS OR OVER LOOSE STONES OR MULCH WITH THE MOWER BLADES
SPINNING.
Always check your work area before mowing and remove any debris that might tangle or damage the
machine.
If you do run into debris and the Mower becomes tangled, turn off the Engine and disconnect the Spark
Plug wire before attempting to untangle the machine.
Slopes
WHEN OPERATING THE DR WIDE-CUT LAWN MOWER OVER UNEVEN TERRAIN OR SLOPES, USE
EXTREME CAUTION NOT TO TIP OVER THE MACHINE.
DO NOT USE THE DR WIDE-CUT LAWN MOWER ON SLOPES GREATER THAN 20 DEGREES. DOING
SO COULD RESULT IN SERIOUS INJURY OR DAMAGE TO YOUR MACHINE.
If you have to mow on sloping terrain, mow across the slope, not up and down, for better control.
To avoid “free-wheeling”, shift into a lower gear before going down a slope. Do not shift while on a slope.
Be ready to use the Brake, if necessary.
Note that the Mowing Deck pivots from side to side, which helps avoid scalping, and keeps the weight
balanced over the drive wheels when operating on uneven terrain.
If the machine gets hung up
Disengage the Blades. Do not try to free the machine from debris with the Blades engaged.
Try putting the machine in reverse and backing away from the obstacle.
Try pushing down on the Handlebars to lift the Lawn Deck over the obstacle.
IF YOU NEED TO LEAVE THE OPERATING POSITION TO CLEAR DEBRIS FROM THE DECK, FIRST PUT THE
MACHINE IN "N" (NEUTRAL), TURN THE ENGINE OFF, SET THE BRAKE, AND DISCONNECT THE SPARK
PLUG WIRE.
DO NOT TOUCH THE EXHAUST AREAS WHEN REACHING FOR THE SPARK PLUG—THEY ARE VERY HOT.
Page view 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 63 64

Comments to this Manuals

No comments