DR WIDE-CUT LAWN MOWER Operations Instructions download pdf (Page 17)

Unpacking the Mower

Tools & Supplies Needed:

• Eye Protection

• Side Cutters & Box Cutter

• Hammer

• Gloves

• THE BANDING IS UNDER TENSION AND MAY SNAP

AND CUT YOU. ALWAYS STAND TO ONE SIDE

WHEN CUTTING THE BAND.

• WEAR GLOVES AT ALL TIMES. BE VERY CAREFUL OF

THE STAPLES. ALSO, BE VERY CAREFUL WHEN

HANDLING THE DECK. THE BLADES ARE VERY SHARP,

AND MAY SPIN AS YOU MANEUVER THE DECK.

1. Stand to one side, cut the carton banding, and

remove the top of the carton.

2. Remove the Small Parts/Product Package, Caster

Wheels, and Mulching Kit from the Right Front

Corner Support (Figure 2a).

3. Pry open the Left Seam and pull the Panels

outward as shown (Figure 2b). Repeat for the

Right Seam and pull the Sides down.

4. Cut the Ties holding the Lawn Deck to the Pallet

and Wood Supports (Figure 2c) and remove the

two (2) Wood Cross Pieces that retain the Lawn

Deck Caster Arms.

5. Cut the Right Cardboard Connectors at the base

of the Wood Supports (Figure 2c) and tip the

Supports up and over to the Left side of the Pallet.

6. Cut the Left Cardboard Connectors and remove

the Supports from the Pallet.

7. Carefully move the Lawn Deck off the Pallet and

rest it on the Rear Casters. Move behind the

Deck and, using the Caster Arms, roll the Deck

away (Figure 2d).

8. Cut the Ties holding the Machine to the Pallet,

move the Shift Lever to Neutral, release the

Parking Brake (Figure 1 on page 11) and roll the

Machine off the Pallet. Do not discard the

Cardboard and Pallet until you are fully satisfied

with your new DR WIDE-CUT LAWN MOWER.

Rear

Left

Right

Front

Figure 2a

Figure 2b

Figure 2c

Cross Pieces

Connector

Supports

Figure 2d

Left Right

Corner Support

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 63 64

Comments to this Manuals

No comments

DR WIDE-CUT LAWN MOWER Operations Instructions Page 17

Comments to this Manuals

Related products and manuals for Lawnmowers DR WIDE-CUT LAWN MOWER