DR WIDE-CUT LAWN MOWER Operator's Manual download pdf (Page 9)

Mowing and Trimming Safety - 9

Pre-Start Inspection

Safety starts before the engine. A thorough inspection of the mower

or trimmer is important before beginning work each day. Use the

checklist on the next page as a guide for daily, visual inspections.

Alert your supervisor if you nd anything wrong during your daily

pre-start inspection.

Belts

Check for loose or damaged belts. Loose belts can slip, causing fric-

tion and a possibly a re. Belts can also break and be ung from the

mower. Tighten loose belts and replace belts if any ply separation or

cracks are visible.

Blade

Make sure the blade is secure, balanced and covered to prevent in-

jury. Report bent, cracked or worn blades to your supervisor. Protect

your hands with heavy-duty gloves when inspecting blades.

Fluid Leaks

Fluid leaks can be a re hazard as well as cause break-downs. Report

signs of leaking uid to your supervisor immediately.

Accumulated Grass or Grease

Check the mower deck and chute for accumulations of grass clip-

pings, leaves, grease and other debris. Debris build-up on moving

parts is a re hazard and can cause break-downs.

Prepare for Safe

Operation

Lesson 2

Objectives

1. Indicate mower parts to be inspect-

ed before operation.

2. Identify steps to prepare the area for

safe mowing.

3. Recognize safe start up and shut

down procedures.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 43 44

No comments

DR WIDE-CUT LAWN MOWER Operator's Manual Page 9