DR SPRINT PRO-XL SELF-PROPELLED Operations Instructions download pdf (Page 21)

Tool needed:

 3/8" Wrench

1. Remove the screws on either side of the Stone Guard and drop it from the

Frame (Figure 32).

Tip: Keep the screws together with the Stone Guard.

Removing and Replacing Section:

Bottom Shield - SPRINT



and PRO Models

NOTE: You do not need to remove the Side Shield or any of its hardware when

removing the Bottom Shield.

Tool needed:

 7/16" Wrench

1. Remove the Mow-Ball™ Support Assembly. See “Removing the Mow-Ball™

Support Assembly” on page 19.

2. Remove the Stone Guard Flap. See “Removing the Stone Guard Flap”

above.

3. Remove the two mounting Bolts and Washers at the rear of the Frame

(Figure 33).

4. Remove the third mounting Bolt and Washer from the front of the Frame on

the outer edge near the Bearing Housing.

5. Slide the Bottom Shield out from under the lip of the Side Shield and remove

it.

6. When reinstalling the Bottom Shield, be sure to tuck it under the lip of the Side Shield first, then finish positioning it and

install the mounting hardware.

7. Reinstall the Stone Guard Flap in the reverse order that you removed it in the previous section.

Bottom Shield – PRO-XL SELF-PROPELLED Model

Tools needed:

 7/16" Wrench

 3/8" Wrench

NOTE: You do not need to remove the Side Shield or any of its hardware when removing the Bottom Shield.

1. Remove the Mow-Ball™ Support Assembly. See “Removing the Mow-Ball™ Support Assembly” on page 19.

2. Remove the two (2) mounting Bolts and Washers at the rear of the Frame and the single mounting Bolt and Washer near the

center using a 7/16" Wrench or Socket (Figure 33).

Before performing any maintenance procedure or inspection, stop the engine, wait five (5) minutes to allow all parts to cool.

Disconnect the spark plug wire, keeping it away from the spark plug.

Before performing any maintenance procedure or inspection, stop the engine, wait five (5) minutes to allow all parts to cool.

Disconnect the spark plug wire, keeping it away from the spark plug.

Figure 32

Remove Screws

Figure 33

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 51 52

No comments

DR SPRINT PRO-XL SELF-PROPELLED Operations Instructions Page 21