DR FIELD and BRUSH MOWER Operations Instructions download pdf (Page 19)

9. Loosen the Belt Retainer Bolts on the outside of the Frame (one on each

side) and slide the Retainer back (Figure 20).

10. Remove the Belt.

11. To mount the new Belt, reverse the above procedure.

Removing and Replacing the Blade

Replace the Blade when worn or damaged, but do not use it for over five (5)

years.

Tools and Supplies needed:

• 15/16" Wrench or Socket

• Torque Wrench (optional)

• Gloves

• 2" x 4" to brace the Blade

1. Block the Blade with a piece of wood between the Blade and the Skid on the

Chute side of the Deck

(Figure 21).

2. Remove the Blade Lock Nut (right-hand, regular thread) and Washer.

3. Remove the Blade.

4. Mount the new Blade, Washer, and Lock Nut and tighten securely (Torque to

30-40 ft-lbs.). If the Locknut is removed and replaced more than once, it

should be replaced with a new one.

NOTE: Be sure to seat the Blade completely over the small ridge in the Spindle Hub

before tightening the Lock Nut.

Adjusting the Wheel Clutch Cable

NOTE: When properly adjusted, tension on the Wheel Clutch Lever should increase

when the Lever is about parallel to (almost touching) the Handlebar Grip.

Tools needed:

• (2) 1/2" Wrenches

1. Find the Wheel Clutch Adjuster on the Bracket on the underside of the machine (Figure 22).

Before performing any maintenance procedure or inspection, stop the

engine, wait five (5) minutes to allow all parts to cool. Disconnect the spark

plug wire(s), keeping it away from the spark plug(s).

Use care when pushing or pulling the wrench next to the blade. Wear gloves;

if the wrench slips off the nut, you may be seriously injured.

Before performing any maintenance procedure or inspection, stop the

engine, wait five (5) minutes to allow all parts to cool. Disconnect the spark

plug wire(s), keeping it away from the spark plug(s).

Figure 20

Loosen Bolt and Slide Back

Figure 21

Blocking the Blade

Bracket

Wheel Clutch

Cable Adjuster

Upper

Nut

Lower Nut

Spring

Figure 22

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 39 40

Comments to this Manuals

No comments

DR FIELD and BRUSH MOWER Operations Instructions Page 19

Comments to this Manuals

Related products and manuals for Lawnmowers DR FIELD and BRUSH MOWER